DIY Perimeter Alarm To Protect Your Home & Camp

There is nothing quite like the peace of mind that comes from knowing your home and camp are safe. But, with high-tech burglary so prevalent today, traditional security systems can be overly expensive. This is why it’s important to look into DIY ways to protect your home and camp. One of these methods is to install a perimeter alarm.

Overview of a Perimeter Alarm

A perimeter alarm is an electronic security system designed to detect and alert the homeowner to an intruder’s presence outside of the home or camp. There are two main types of perimeter alarms: wired and wireless. A wired system requires physical connections between the sensors and the control panel. A wireless system utilizes radio signals or infrared radiation to detect intruders. Both types of systems consist of a control panel, sensor, and siren.

Benefits of a Perimeter Alarm

Perimeter alarms are a great way to protect your home and camp without breaking the bank. One of the biggest benefits of the perimeter alarm is its ability to detect intruders before they have a chance to enter the home or camp. This gives the homeowners or campers time to take necessary steps to protect themselves, like call the police or get to a safe place. Additionally, perimeter alarms are fairly easy to install and don’t require digging trenches or running wires; wireless systems are particularly easy to install.

DIY Installation: What You’ll Need

If you’re looking to install a perimeter alarm yourself, there are a few tools and materials you’ll need. Depending on which type of system you choose, wired or wireless, the installation steps will vary.

For wired systems, you’ll need wire cutters, drills, drill bits, hammers, pliers, and a screwdriver. You’ll also need wires, junction boxes, and the parts that come with your system.

For wireless systems, you’ll need drills, screws, and an electrical tester. You’ll also need the parts that come with your system, like motion detectors, contact sensors, and sirens.

DIY Installation: Step by Step

Wired Installation

1. Start by reading the product installation instructions that came with your system.

2. Hook the wires to the control panel and sensors.

3. Mount the junction boxes, which will house the wires and control panel.

4. Drill holes for the wires to be placed through and for the mounting screws.

5. Secure the wires into the junction boxes.

6. Connect the control panel to the power source.

7. Test the system to make sure it’s working properly.

Wireless Installation

1. Start by reading the product installation instructions that came with your system.

2. Place the motion detectors, contact sensors, and sirens at designated points around the home or camp.

3. Secure the sensors to walls with screws.

4. Install the control panel and mount it to the wall with screws as well.

5. Connect the control panel to the power source.

6. Check the power level of the wireless units and test the system.

Conclusion

Installing a perimeter alarm is a great way to protect your home and camp without breaking the bank. DIY installation is fairly straightforward and can be done using either a wired or wireless system. Keep in mind that you’ll need a few tools and materials, like wires, junction boxes, and drill bits. Also, make sure to read the product installation instructions that come with your system. With the right tools, materials, and know-how, you’ll have a fully functioning perimeter alarm in no time.